|
|
|
|
Working at widths from 2.73 m to 4.04 m (8'11" to 13'3"), the rear-mounted EasyCut disc mowers deliver the cleanest of cuts. Forming a compact combination with the tractor, these machines stand out for light pulling and great ground contouring in any type of terrain.
EasyCut R 280 CV, R 320 CV are for those who seek faster wilting. The tined conditioner gives fullwidth treatment to the freshly cut material.
- KRONE SafeCut, full driveline protection which allows the discs to move away from obstacles for maximum productivity and comfort. Only a quick roll pin change to fix, dont need to enter the bed.
- DuoGrip, the parallelogram linkage absorbs lateral forces and guides the unit in direction of travel.
- SmartCut, increased overlap between the discs that turn outwards – a modification that leads to stripeless cuts in light and young material.
- Safe road travel, when folded up the weight is in the middle of the tactor, improving ride quality.
- R280 Mower c/w Outer Swathboard
- R320 Mower c/w Outer Swathboard
- R280CV Mower Conditioner c/w Wide Spread
- R320CV Mower Conditioner c/w Wide Spread
Forget about stripes. With some discs turning in pairs towards each other and others away from each other, it was necessary to redesign the degree of blade overlap to ensure cleanest cuts. Therefore we increased the overlap between those discs that turn outwards – a modification that leads to stripeless cuts in light and young material. Vice versa, a larger gap between the blades that turn towards each other encourages the smooth flow of large masses to the rear.
Peace of mind: Instead of transferring the full shockload to the spur gears, the roll pin in the sprocket driveshaft breaks when there is a momentary overload. The pinion shaft continues spinning, jacking up the disc in question and the disc moves out of the risk zone and the orbit of the neighbouring discs. This way SafeCut prevents damage to the spur gears and the neighbouring discs.Replacing the roll pin takes a few minutes and is not very costly.
