|
|
|
|
The AEROSTAR-ROTATION combines the advantages of a tined weeder and a rotary hoe. Compared to a usual tined weeder the AEROSTAR-ROTATION achieves a higher level of weed control. Rotating working tools unroot or cover weeds, encourage tillering and crack even hard soil crusts without any problems. This machine is also very well suited for higher residue conditions and slightly moisture soil.
The hydraulic pressure adjustment allows anything from full pressure on the star wheels to no pressure. No pressure allows the wheels to float. Therefore the machine is perfectly suited for difficult soil conditions and sensitive special crops. A level seedbed preparation is necessary for low pressure operation.
An effective use of the machine is also possible in a late growth stage, because the rotating wheel does not push down any plants, but releases them. The inclined star wheels also have a better effect in the rows.
Diameter of star wheels 50 cm / 9.7“ – tine diameter 6.5 mm / 0.26“ Line spacing 15 cm / 5.9“
Separate mounting of each star wheel
Maintenance free bearings on the star wheels
Hydraulic adjustment of aggression – full or no pressure on the star wheel is possible
Pressure and level control between the sections
Large bearing mounted rubber support wheels, distance approx, 1.36 – 2.20 m / 4.46 - 7.22 ft
Dimension 16 x 6.50/8 (with shear folding 18 x 8.50/8 in the middle)
Shear retraction through parallel guidance (see page 11)
Parking support
Transport width 3.00 m / 9.8 ft
Rotation-weeding-element instead of normal tines for working in the center of the machine (recommended for heavy residues)
Control valve: combines 2 double acting hydraulic connections to 1
(for machines with shear retraction)
Inside twin wheels 18x8.50-8 Outside single wheels 18x8.50-8 instead of standard wheels for light and sandy soils
Warning signs and lights