Home Manufacturers McConnel Displaying items by tag: McConnel

The McConnel PA5570 hedger is Halse of Honitons most popular selling hedger suitable for large farmers and contractors alike it is the new version of the immensley popular PA55 but now has a 70hp Pump and motor oil cooler as standard and has seam welded arms for increased strength and 18' reach.The PA6070 is the same build as the PA5570 but with longer arms making the reach 19'8" and the PA6570T hedger is a telescopic version of the PA5570 giving you a total reach of 21'5" when the dipper arm is extended at full reach also the PA7070T is the same built hedger with a longer main arm giving you 23' reach. The hedgers come with a choice of controls from the standard ever reliable electric box to the Xtra Touch Controls (XTC) using proportional reach, lift and tilt controls up to the new Revolution Armrest Joystick control where speed of arms can be programmed to suit the customers requirements. The hedgers come with standard, power slew, road lighting, oil cooler and front flap kit as standard. There is also a choice of flailheads to fit the PA5570 at extra cost from 1.2m up wards.

McConnel's Rhino Topper range are rotary toppers built to last and are strong enough to tackle more than your everday pasture. The 9ft Rhino is the best selling topper we have with year on year success of 50+ units going out the gates and why, well the Rhino 9 has contra rotating heavy blades which lift the grass after you've driven over it meaning a near perfect cut across the 9ft. It has big heavy swinging blades & rubber protected drive line meaning if you hit something then the rubber donuts take the initial shock before the slip clutch kicks in.

The McConnel PA48 hedger is the most popular 3 point linkage hedger throughout the country, originally the PA93 this hedger is just a newer version of it with 54hp pump and motor, 15'9" reach and a choice of cable or electric controls the PA48 suits most needs. It comes with flail rotor reverse and a 1.2m Multicut flailhead as standard and has a 15 deg spring breakaway for safety and transport.

The McConnel PA5155 hedger is very similar to the PA48 although it has the 90 deg power slew, it has 55hp pump and motor, 16'5" reach and a choice of cable or electric controls. The PA5455 is the same frame work hedger but with longer main and dipper arm giving you 17'5" reach. The are choices of Cable, electric XTC or revolution controls. It also comes with cable flail rotor reverse as standard (electric as a extra cost option) and a 1.2m Multicut flailhead with an option of putting a 1.5m Multicut flailhead on the PA5155 at extra cost.

McConnel's SE range of toppers are well built and will with stand years of heavier duty cutting built for more than just pasture topping it will cut bracken brambles etc, the SE6 is based on the same idea as the SE5 and SE7 the SE5 being slightly lighter built and the SE7 slightly heavier built. The topper has Slip clutch protection on the drive shaft and comes with one rotor with 2 heavy swinging blades that tend to lift the grass up and mulch it up more than a normal pasture topper.

The McConnel PA6085 hedger is a 3 point linkage mounted trimmer as standard, for the large scale farmer / contractor it has a choice of XTC controls or V5 Revolution Controls and has electric flail control as standard. The PA6085 has a 19'8" maximum reach where as the PA6585 has a telescopic arm giving it 21'5" reach , they also come with power slew, oil cooler, road lighting, front flap kit as standard and the option of a  built in Debris blower. There is also a choice of flailheads and attachments to fit the PA6085/PA6585 at extra cost. The hedger uses McConnels new gear drive system producing 85hp through the pump and motor to give that extra power in tough conditions.

The McConnel PA5360 hedger has a 60hp Pump and motor for increased productivity it also has seam welded arms for increased strength.The hedger has a 17'5" maximum reach, power slew,road lighting and front flap kit as standard. The PA5860 is built in exactly the same way but the PA5860 has an each 2' reach taking it to 19'5". Both machines come with a choice of controls from Cable, Electric, XTC or the new Revolution Controls to suit every operators needs or requests. There is also a choice of flailheads and Variable Forward Reach (VFR) to fit the PA5360 at extra cost.

The McConnel PA4745 hedger comes with a 1.2m Supercut flailhead which is the lighter of the 2 heads that McConnel do, it has a mechanical breakaway on the linkage and has a 45hp pump & motor, 15'5" reach and a choice of Cable or electric controls. The totally independent model comes with flail rotor reverse but the semi independent doesn't.

The McConnel PA3430 hedger comes with a 1.0m Supercut flailhead, it has a hydraulic breakaway on the dipper arm and has a 30hp pump & motor, 11'2"reach and a choice of Cable or electric controls. The totally independant model comes with flail rotor reverse but the semi independant doesn't.

McConnel's SR Topper range are rotary toppers built to last and are strong enough to tackle more than your everday pasture the SR 460 is 4.6m cutting width. The topper uses 3 rotors of blades to do the cutting with either 2 or 3 blades per rotor, it has hydraulic folding wings and comes with 6 wheels on the back with an option of having 8 for very undulating ground.

<< Start < Prev 1 2 Next > End >>
Page 1 of 2